Adaptec FC4100 Manuale Utente Scaricare il pdf (Pagina 3)

Safety Tips

Caution: A fully loaded enclosure is heavy. Reduce the weight

of the enclosure by removing the drive carriers before

installing the enclosure in the rack or tower. (You can also

remove the two APCs to further reduce the weight, if

required. See the Adaptec Storage Enclosure Installation and

User’s Guide on the CD for instructions.)

Caution: To prevent personal injury, have someone assist you

during rack installation.

Caution: If you are installing your enclosure in a rack, prevent

personal injury and equipment damage by following the rack

manufacturer’s safety instructions. Install your enclosure only

in a rack that has been properly secured in an area with

suitable environmental conditions.

Step 1: Installing into a Rack or Tower

(optional)

Required tools:

■ Phillips-head screwdriver

■ Wrench for tightening nuts (if your rack does not have threaded

holes)

If you are not installing your Storage Enclosure into a rack or

tower, skip to Step 2: Installing the Drive Carriers on page 6.

■ To install your Storage Enclosure into an equipment rack, see

page 3.

■ To install your Storage Enclosure into a tower assembly, see

page 5.

1 2 3 4 5 6 7 8 ... 12 13

Nessun commento

Adaptec FC4100 Manuale Utente Pagina 3