Adaptec 6320SS Manuale Utente

DUAL CONTROLLERDURASTOR 6200S/7200SCONFIGURATION GUIDEDuraStor 6200S and 7200S.book Page 1 Tuesday, July 9, 2002 3:25 PM

6DuraStor 6200S/7200S Dual Controller Configuration Guide6 From the terminal menu, select Transfer, then Send File.7 Click Browse to navigate to the f

7Upgrading the Controller FirmwareThe controller automatically restarts to enable the new firmware. The activity status and firmware version is displa

8DuraStor 6200S/7200S Dual Controller Configuration GuideChanging the Controller’s Operating ModeTo set up a dual-controller environment, change the m

9Changing the Controller’s Operating Mode6 Select Operating Mode and press Enter.7 Select the operating mode type and press Enter. 8 Exit out of the A

10DuraStor 6200S/7200S Dual Controller Configuration Guide11 Power ON the storage subsystem. 12 Repeat Steps 1 through 7 for the second controller.13

RAdaptec, Inc.691 South Milpitas BoulevardMilpitas, CA 95035 USA©2001-2002 Adaptec, Inc.All rights reserved. Adaptec and the Adaptec logo are trademar

RDuraStor 6200S/7200SExternal RAID ControllerDual ControllerConfiguration GuideDuraStor 6200S and 7200S.book Page i Tuesday, July 9, 2002 3:25 PM

iiCopyright© 2001-2002 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted

iiiAdaptec Customer SupportIf you have questions about installing or using your Adaptec product, check this document first—you will find answers to mo

1Installation and ConfigurationIn this GuideThis document describes how to install the 6200S SCSI and the 7200S Fibre Channel RAID controllers into a

2DuraStor 6200S/7200S Dual Controller Configuration GuideSystem Requirements To work in a dual-controller environment, both controllers must have the

3Upgrading the Controller FirmwareUpgrading the Controller FirmwareThis section describes how to upgrade the firmware of your DuraStor RAID controller

4DuraStor 6200S/7200S Dual Controller Configuration Guide6 Select Utilities Menu and press Enter.7 Select Hardware Information. The Base Level indicat

5Upgrading the Controller FirmwareUpgrading the FirmwareTo upgrade the firmware on both the primary and secondary controllers:1 From the System Menu,